Pole P swing gate widely applieed to shopping mall, railway station, subway, pedestrian passage etc.

Features:
Dimensions:
Pole diameter: 168mm / 6.6inches
Pole height: 1050mm/ 3.44ft
Arm length: 600-1000mm / 2ft-3.28ft（default length is 600mm / 2ft)
Packaging weight: 35Kg / 77Lbs
Material: 304 stainless steel, thickness 1.5mm , brushed or polished finished
Power requirement: AC220V 50Hz or AC110V 50-60Hz
Working temperature:-30℃-60℃/-22℉- +140℉
Working humidity: 5-95%
Communication interface: RS485

Functions:
1. Bi-directional function( could enter from both end ).
2. Fail safe, which means the arm will be opened when power off (or fail secure, which means the arm will be locked when power off ) .
3. Auto-lock function, the arm will be locked after legal pass-through interval is over.
4. Anti-clamping function, the arms will remain opened continually while passenger holds the arm not at the locking position. We specially designed the separation technologies of transmission of gear wheel, the slave gear will separate the master gear immediately when revolving barrier meet obstacle until the obstacle is removed and thus will not damage either gear wheel or electromotor.
5. Anti tail-after detector ( custom made, it need add a pair of infrared detector inside the cabinet on both end so it can detect illegal invasion on both end ), notice this function is not default
6. Push-button and wireless remotes ( custom made )

Installation steps:
1. Connect with 220VAC.
2. Connect with Left-open, Right-open, Com three ports.

Cautions:
1. Unless permission from manufacturer, the liability of equipment would be guaranteed subject to no peripherals connection and mechanical wear well grounded protected.
2. when the facility is installed outside, please make sure a concrete base foot of 200 mm height for anti-humidity, furthermore, a shelf should be overhead constructed for anti-sunshine. Naked installation in the open environment is strictly forbidden.

Thank you for your interest in our Pole P swing gate.