Other Products
Contact Us
|
|
Find on this site:
Bridge type free access barrier
Bridge type, free access, intelligent manage, LCD display, level or pulse signal input, RS485/RS232 interface, free access barrier.
Model # : ACC-200A
Overview
Features
Functions
Installation
Cautions
Certification
ACC-200A
Bridge type free access barrier widely applied to hotels, residence area, clubs, enterprises and so on, those need intelligent manage to the access .
Thank you for your interest in our bridge type free access barrier. You can see more information about features, functions, installation, cautions, related solutions.
Features:
Power Supply: AC220V±0% 、50HZ
Driven motor: DC brushless motor (standard edition)、 DC brush motor（simple edition） 140W/36V
Motor rotational speed: 1600rpm
Operating environment temperature: -15℃ ～60 ℃
Relative humidity: ≤90%、no dense
Input port: 12V level signal or pulse wide＞100ms 12V pulse signal，Current >10mA
Communication coverage ≤1200m
Passage width：≤700mm
Passing speed: 50 persons / min (normally-opened mode).
30 persons / min (normally-closed mode).
Material: SUS304.
Weight: 70KG
Communication interface: RS485
Power Supply: AC220V±0% 、50HZ
Driven motor: DC brushless motor (standard edition)、 DC brush motor（simple edition） 140W/36V
Motor rotational speed: 1600rpm
Operating environment temperature: -15℃ ～60 ℃
Relative humidity: ≤90%、no dense
Input port: 12V level signal or pulse wide＞100ms 12V pulse signal，Current >10mA
Communication coverage ≤1200m
Passage width：≤700mm
Passing speed: 50 persons / min (normally-opened mode).
30 persons / min (normally-closed mode).
Material: SUS304.
Weight: 70KG
Communication interface: RS485
Functions:
1. Top LCD indicator.
2. Bi-directional function( could enter from both end ).
1. Top LCD indicator.
2. Bi-directional function( could enter from both end ).
Installation steps:
1. Connect with 220VAC.
2. Connect with Left-open, Right-open, Com three ports.
1. Connect with 220VAC.
2. Connect with Left-open, Right-open, Com three ports.
Cautions:
1. Unless permission from manufacturer, the liability of equipment would be guaranteed subject to no peripherals connection and mechanical wear well grounded protected.
2. when the facility is installed outside, please make sure a concrete base foot of 200 mm height for anti-humidity, furthermore, a shelf should be overhead constructed for anti-sunshine. Naked installation in the open environment is strictly forbidden.
1. Unless permission from manufacturer, the liability of equipment would be guaranteed subject to no peripherals connection and mechanical wear well grounded protected.
2. when the facility is installed outside, please make sure a concrete base foot of 200 mm height for anti-humidity, furthermore, a shelf should be overhead constructed for anti-sunshine. Naked installation in the open environment is strictly forbidden.
You may be also interested in
