Other Products
Contact Us
|
|
Find on this site:
TCP IP rfid bridge type round corner turnstile
RJ45 ethernet interface,TCP IP control, with software development kit(SDK), with 2 Embedded
Rfid card reader.Top LED authorization indicator,(Bi-directional).round corner, waist height,
(can enter from both end,and can be configured to be free or prohibited or controlled access).
Model # : ACC-2013.NET
Overview
Features
Funtions
Installation
Cautions
In solutions
ACC-2013.NET TCP/IP bridge type round corner turnstile is based on TCP/IP communication protocol, which uses network optical cable to transfer data of turnstile control information. TCP/IP network turnstile has a built-in internet communication port on its main board and could be connected with router or hub directly throught network cable. By TCP/IP network, the turnstile access control system could manage turnstiles in a same LAN, or a large WAN, or on internet.
More important, we not only provide manage software but also provide software development kit(SDK) to customer to develop their own customized applications.
ACC Turnstile SDK 3.0.4 is available for download here.
The main difference between TCP/IP network turnstile access control system and RS485 access control system has two factors, first is the transmission speed, TCP/IP is much faster than RS485(TCP/IP is 10M/100M Bytes while RS485 is 9600Baud, 1Baud=1 bit per second), second is the capacity of the whole system, the size for RS485 and LAN is 255, the size for WAN or Internet use is unlimited.
The ACC-2013.NET turnstile widely applied to shopping mall, railway station, subway, pedestrian passage etc.
Thank you for your interest in our TCP IP bridge type round corner turnstile.You can see more information about features, functions, installation, cautions, related solutions.
More important, we not only provide manage software but also provide software development kit(SDK) to customer to develop their own customized applications.
ACC Turnstile SDK 3.0.4 is available for download here.
The main difference between TCP/IP network turnstile access control system and RS485 access control system has two factors, first is the transmission speed, TCP/IP is much faster than RS485(TCP/IP is 10M/100M Bytes while RS485 is 9600Baud, 1Baud=1 bit per second), second is the capacity of the whole system, the size for RS485 and LAN is 255, the size for WAN or Internet use is unlimited.
The ACC-2013.NET turnstile widely applied to shopping mall, railway station, subway, pedestrian passage etc.
Thank you for your interest in our TCP IP bridge type round corner turnstile.You can see more information about features, functions, installation, cautions, related solutions.
Features:
1.Dimensions: 1200x990x280mm
2.Packaging weight: 60-70Kg
3.Material:1.5mm 304# stainless steel , brushed finishing or polished( mirror surface )
4.Power input: AC220V 50Hz or AC110V 50-60Hz
5.Power consumption: <50W
6.Main board power input: 12VAC & 18VAC
7.Electromotor power consumption: 24VDC
8.Electromagnetic power consumption: 24VDC
9.Other circuit board power consumption: 12VDC
10.Working temperature:-30℃-60℃/-22℉- +140℉
11.Working humidity: 5-95%
12.Length of arm: default 600mm (max 900m)
13.Passing Speed: 50 persons/min
14.Working Environment: Indoors or outdoors with shed
15.Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
16.Automatic Card identification.
17.TCP/IP comunication, all the turnstiles can be managed by center computer through TCP/IP network. Monitor the events of the turnstiles, Operate the turnstiles.
18.Turnstile access control system can detect physical connection (Between computer to turnstile.), if the physical connection is disconnect, it will return a alarm every second until physical connection is connect.
19.The quantity of the cards which can be cognized by turnstiles is unlimited.
20.Embedded RFID reader frequency: 125KHz.
21.The software for system manage is easy to use.
1.Dimensions: 1200x990x280mm
2.Packaging weight: 60-70Kg
3.Material:1.5mm 304# stainless steel , brushed finishing or polished( mirror surface )
4.Power input: AC220V 50Hz or AC110V 50-60Hz
5.Power consumption: <50W
6.Main board power input: 12VAC & 18VAC
7.Electromotor power consumption: 24VDC
8.Electromagnetic power consumption: 24VDC
9.Other circuit board power consumption: 12VDC
10.Working temperature:-30℃-60℃/-22℉- +140℉
11.Working humidity: 5-95%
12.Length of arm: default 600mm (max 900m)
13.Passing Speed: 50 persons/min
14.Working Environment: Indoors or outdoors with shed
15.Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
16.Automatic Card identification.
17.TCP/IP comunication, all the turnstiles can be managed by center computer through TCP/IP network. Monitor the events of the turnstiles, Operate the turnstiles.
18.Turnstile access control system can detect physical connection (Between computer to turnstile.), if the physical connection is disconnect, it will return a alarm every second until physical connection is connect.
19.The quantity of the cards which can be cognized by turnstiles is unlimited.
20.Embedded RFID reader frequency: 125KHz.
21.The software for system manage is easy to use.
Functions:
1. Top LCD indicator( Bi-directional).
2. Bi-directional function (could enter from both end).
3. Fail safe, which means the arm will drop down when power off (or fail secure, which means the arm will be locked when power off ) .
4. Anti-clamping, which means the arm will be unlocked if a people hold the arm when (s)he is passing through.
5. Anti tail-after detector (custom made, it need add a pair of infrared detector inside the cabinet on both end so it can detect illegal invasion on both end), notice this function is not default
6. Push-button and wireless remotes (custom made)
7. Delrin main indexing cam for years of maintenance free reliability.
8. Adjustable time out delay.
9. Dry contact relay.
1. Top LCD indicator( Bi-directional).
2. Bi-directional function (could enter from both end).
3. Fail safe, which means the arm will drop down when power off (or fail secure, which means the arm will be locked when power off ) .
4. Anti-clamping, which means the arm will be unlocked if a people hold the arm when (s)he is passing through.
5. Anti tail-after detector (custom made, it need add a pair of infrared detector inside the cabinet on both end so it can detect illegal invasion on both end), notice this function is not default
6. Push-button and wireless remotes (custom made)
7. Delrin main indexing cam for years of maintenance free reliability.
8. Adjustable time out delay.
9. Dry contact relay.
Installation steps:
1. Connect with 220VAC.
2. Connect with Left-open, Right-open, Com three ports.
1. Connect with 220VAC.
2. Connect with Left-open, Right-open, Com three ports.
Cautions:
1. Unless permission from manufacturer, the liability of equipment would be guaranteed subject to no peripherals connection and mechanical wear well grounded protected.
2. when the facility is installed outside, please make sure a concrete base foot of 200 mm height for anti-humidity, furthermore, a shelf should be overhead constructed for anti-sunshine. Naked installation in the open environment is strictly forbidden.
1. Unless permission from manufacturer, the liability of equipment would be guaranteed subject to no peripherals connection and mechanical wear well grounded protected.
2. when the facility is installed outside, please make sure a concrete base foot of 200 mm height for anti-humidity, furthermore, a shelf should be overhead constructed for anti-sunshine. Naked installation in the open environment is strictly forbidden.
Related solutions
You may be also interested in
